Blindsmiths
1

Labels

Print the paperwork pack, choose stock and preview modes, tune label content, and add run, fabric, or roll markers before handoff.

/jobs/{jobId}/labels

Use the labels workspace for the paperwork pack

Labels is the printable paperwork surface. Use the setup rail or tools docks to choose the stock preset, switch between content, outline, and calibration preview modes, save per-stock content spacing, and correct printer placement only when needed. Use marker controls for run count, fabric markers, roll markers, and marker-lane placement; filtered labels renumber so the printed sequence stays usable. Use arrange mode when you need to reorder or restore labels, and keep Back to job and Print labels visible before printing.

Overview

Open full size for readable detail

Detail views

Expected result

The paperwork pack prints from the live job with the right stock, preview mode, marker settings, content settings, and calibration.

Last verified 2026-04-10

2

Production sheet

Use the production sheet as the printable production summary and supplier-shaped export surface, with print layout, table display, and saved profiles adjusted from the same route.

/jobs/{jobId}/sheet

Review the printable production summary

Production sheet is the handoff surface for rows, materials, printable summary detail, and supplier-shaped export after the job has been captured and reviewed. Use the print tools to change text size, table density, customer-name scale, orientation, screen-row highlighting, and the 50mm calibration ruler. Use the right-side tools dock to choose visible columns, emphasize key fields, and decide which summary blocks and notes print. Use selected-row export for blind-only XLSX or CSV output; XLSX creates workbook tabs, CSV creates per-fabric files, and the export profile is saved separately from print templates. If offline journal edits are still pending, printed output is marked DRAFT - not synced until reconnect completes.

Overview

Open full size for readable detail

Detail views

Expected result

The team can print, review, or export the production summary with the right layout, visible columns, summary blocks, draft-sync state, and supplier-shaped output without leaving the job route.

Last verified 2026-04-10

3

2D nesting

Use 2D nesting for fabric layouts, cutter mode, roll widths, remembered generate settings, preview controls, and DXF or print output while keeping actions visible.

/jobs/{jobId}/nesting

Generate and export the fabric layout

2D nesting is the fabric layout workspace. Set cutter mode, roll widths, outside margin, cut gap, and panel length, then generate the layout. First local use defaults panel length to 5000 mm; after a successful Generate, the same local settings are restored next time. Row selection starts collapsed so operators can scan the generated output first, with the selected-entry summary still visible. If any row or nesting setting changes after generation, the page marks the prepared layout stale and asks for regeneration before print, labels, or DXF export. Use the print tools to adjust text size, table density, orientation, and dimension-label scaling. Use the preview controls to switch fabric tabs, change between split view and full roll, show or hide dimensions, and zoom the active preview. Keep the Actions dock visible so print and DXF export stay available from the same page.

Overview

Open full size for readable detail

Detail views

Expected result

Operators can generate a fresh fabric layout, see when changed settings require regeneration, inspect the live preview, adjust print output, and export DXF while keeping job navigation visible.

Last verified 2026-06-15

4

1D nesting

Use 1D nesting for tube and bottom-bar cut planning with layout settings, cut-list tools, label tools, and print controls in the same workspace.

/jobs/{jobId}/nesting/linear

Generate the linear cut layout

1D nesting is the linear cutting workspace. Set kerf, cut addition, stock lengths, and optional cluster matching first, then generate the cut layout. Use the Display panel to control on-screen table detail, the Cut list panel for output rules and offcut visibility, and the Labels panel when you need to switch from cut list to labels, override label order, or edit stock, content, barcode, and calibration settings. The print tools control text size, density, orientation, and calibration for the cut list, while label content and barcode settings stay in the label tools.

Overview

Open full size for readable detail

Detail views

Expected result

The linear cut plan is generated with the correct stock setup, visible tool panels, and print or label output available in the same workspace.

Last verified 2026-04-10

5

Quote

Use Quote to review the pricing source, adjust visibility and pricing scope, tune print layout, and save or present the customer quote.

/jobs/{jobId}/quote

Review and save the customer quote

Quote is the customer-facing pricing workspace. Use the print tools to change text size, table density, orientation, and the calibration ruler. Use the Display panel to switch between Office and Customer profiles, choose which header, table, and summary fields are visible, and save the default print profile. Use the Pricing panel to control repricing scope across all blinds, fabric types, or fabric selections even when the Group column is hidden. Keep adjustments, tax, notes, customer details, save, and print actions on the same page.

Overview

Open full size for readable detail

Detail views

Expected result

The job quote reflects the approved pricing source, the right display profile, the intended pricing scope, and the saved customer-facing total.

Last verified 2026-04-10